








This Woodinville kitchen remodel was a full gut job - and that meant we had full access to everything behind the walls. That's actually the best-case scenario when a home has aluminum wiring. Aluminum wiring was common in homes built during the 1960s and 70s, and while it was code-compliant at the time, it creates real fire risk as it ages. The connections loosen, the wire oxidizes, and the result is a system that just wasn't built for the demands of a modern kitchen.
So we pulled it all out. Every circuit in this kitchen got replaced with new copper wiring - proper gauge, properly routed, and landed clean. You can see in the demo phase how much was going on in those walls. Multiple circuits stacked up, new box locations mapped out, recessed lighting positions cut in the ceiling before drywall went back up. It's organized, deliberate work. Nothing thrown in just to get through rough inspection.
The finished space tells the whole story of what good electrical work makes possible. The pendant lights over the island hang clean with no visible wiring. The under-cabinet LED strips run seamlessly across the full length of the cabinets. Counter-level outlets sit flush against that white quartz backsplash - placed exactly where they need to be for how this kitchen actually gets used. None of that happens without circuits that were purpose-built for this layout.
What we did here falls squarely under both home rewiring services and electrical remodeling - it's not one or the other when you're redoing a kitchen from scratch. The wiring had to go. But it also had to be planned around the new layout, the new lighting design, and the new appliance load. That's the part that requires real experience, not just pulling wire.
A kitchen remodel is one of the few times you get clean wall access like this. If your home has aluminum wiring and a remodel is on the horizon, that's the window to address it properly - not patch it, not pigtail around it, but replace it the right way while the walls are already open.